Secabo TC2 heat press 23cm x 33cm
With the TC2, Secabo has the right transfer press for entry into textile finishing and other transfer technologies. The contact pressure is set via a handwheel on the top side of the heating plate. The pressing process is started by closing the press lever.
With the TC2 heat press Secabo shows up with the right press for the introduction into textile finishing and other transfer techniques. On the digital controller of the Secabo TC2 time and temperature for the transfers can be set. After the transfer is done, an acoustic signal sounds. The contact pressure is adjusted by a hand wheel on the upper side of the heating plate. The pressing operation starts when the pressing lever is closed. The large opening angle allows comfortable preparing of the transfer objects on the base plate. The TC2 has a working area of 23cm x 33cm and a heating plate with a power consumption of 1.000W.
- inexpensive transfer press for beginners
- mobile press for on-site use at events and merchandising
- wide opening angle
- digital controller for temperature and time
|dimensions||34cm x 40cm x 46cm|
|pressure setting||the heating plate can be adjusted with a hand reel|
|net weight||19 kg|
|working area||23cm x 33cm|
|max. working pressure||150 g/cm²|
|max temperature||255 °C|
|maximum time preset||999 s|
|power supply||230V / 50Hz - 60Hz, 1,0kW|
|environment||5°C - +35°C / 30% - 70% humidity|
|folding angle||0 ° - 45 °|
|locking system||manual toggle lever|
Frequently also ordered
Please register to write a review.