Cart
YOW! Advent Calendar

YOW! Advent calendar – the 12th door

YOW! Shop
1 min read

When warm thoughts aren’t enough to keep your feet warm:

Just a few simple steps to your own personalised, cosy hot water bottle:

  1. Design your own motif on your computer and plot it onto self-adhesive flock film using the cutting plotter. Weed the flock film, cover it with transfer film and press it down firmly.
  2. Position the lettering on the hot water bottle (with a fabric cover) using the transfer film and press down firmly.
  3. Carefully peel off the transfer film – and you’re done.
Secabo cutting plotter with Lapos laser positioning, with red flock foil inserted for the hot water bottle design
Weeded red flock foil lettering for our little Luisa on transfer foil, with the removed backing grid held in her hand next to it
Hand uses a red pressure roller to firmly press the transfer foil onto the red flock foil lettering for our little Luisa
A hand peels the transfer film, featuring red plotted flock lettering, off the backing paper, ready to be stuck onto the hot water bottle
Hot water bottle with a white fleece cover without a design, as it appeared before the plotted lettering made from flock foil was applied
A hand presses the red flock foil lettering ‘Our little Luisa’, together with the transfer foil, onto the white fabric cover of a hot water bottle
A hand peels off the transfer foil from a white hot water bottle with a felt cover; underneath is red lettering made from flock foil bearing the name ‘Luisa’
Hot water bottle with a white fleece cover, featuring red flock-foil lettering: ‘For our little Luisa’ – the finished DIY project
Tags Cutting plotter Flock film Transfer film self-adhesive flock film

More posts

Go to the blog