The new TC5 and TC7 transfer presses from Secabo are here

The Secabo TC7 automatic-opening transfer press.

As of this week, we have started stocking the new automatic-opening transfer presses from Secabo. The successors to the long-serving TC5, TC7 and TCC models are now all fitted with an automatic opening mechanism.

The new TC5 and TC7 Clam transfer presses from Secabo are automatically opening toggle-lever presses. The user does not need to wait next to the press during transfers, but can carry out other tasks instead. Once the set time has elapsed, the press opens automatically and gives an audible signal three seconds beforehand to indicate this. Temperature and pressing time are conveniently preselected via a large digital controller; a counter keeps track of the number of pressing cycles completed and can be reset to zero if required. The pressing force is adjusted using a large handwheel on the top of the heating plate.

The Secabo TC5 automatic transfer press.

The TC5 transfer press, with a working surface of 38 cm x 38 cm, and the TC7 transfer press, with a working surface of 40 cm x 50 cm, both feature an additional cover plate for the heating plate to protect the user from burns. Both folding presses are suitable for professional use with all standard heat transfer processes, such as flock films, flex films, sublimation, transfer, InkJet-Flex, Chromablast, etc.

The Secabo TC5 and TC7 can be optionally fitted with interchangeable plates in various formats and a corresponding quick-change system.

In addition to the TC5 and TC7, there is also a new cap press – the TCC – which also opens automatically.

Here is a brief introduction to the new transfer presses on YouTube: