YOW! Logo
Advertising Technology & Creative Technologies

Secabo SH7 Softheat 35cm x 45cmSecabo SH7 Softheat 35cm x 45cm
Secabo SH7 Softheat 35cm x 45cm
Secabo SH7 Softheat 35cm x 45cm
Secabo SH7 Softheat 35cm x 45cm
Secabo SH7 Softheat 35cm x 45cm
Secabo SH7 Softheat 35cm x 45cm
Secabo SH7 Softheat 35cm x 45cm

Secabo SH7 Softheat 35cm x 45cm

by Secabo

Article number: 109.645.21

The desired working pressure is set on the pressure regulator; a compressor is required for this. The hot plate that always runs - Made in Germany - The new membrane heating plate from Secabo, known as the “Softheat SH7”, has long-awaited features that solve the typical problems of many transfers.

2.093,44 €
 incl. VAT
Please enter a quantity.
Oliver Bayer
Greta Faßbender
Alicia Hierl
Angelina Bayer
YOW! Vertriebsteam
mail@y-o-w.com
0800 - 9697467

product details

The hot plate that always runs - Made in Germany - The new membrane heating plate from Secabo, known as the “Softheat SH7”, brings with it long-awaited special features that solve the typical problems of many transfers. With this new heating technology made in Germany, high-quality and complex textiles are protected, unevenness in transfers perfectly compensated and the heat imprint on the textiles minimized. The pressure and temperature peaks in problematic areas such as buttons, hem and seam are minimized and air pockets under the heating plate are avoided. Even shiny polo collars are a thing of the past with the SH7 softheat heating plate. The innovative membrane heating plate also saves time when inserting the textile, since there is no need to pull shirts or position seams over the edge. Buttons, collars, zippers etc. can largely remain in the press. The Softheat heating plate is ready for use after only three minutes of heating. The SH7's power consumption is significantly lower than that of conventional heating technologies. The desired working pressure is set on the pressure regulator; a compressor is required for this. After closing the transfer press, the membrane in the SH7 inflates automatically. Another special feature of this heating technology is that there is only minimal discoloration due to the heat imprint on the textile, while classic heating plates cause clearly visible changes. This means that removable plates or pillows to avoid large-scale discoloration become superfluous. The Secabo SH7 membrane heating plate stands for completely new work with a transfer press and offers unimagined possibilities in terms of productivity and quality. Many old and almost all new transfer press models from Secabo are suitable for retrofitting with the Softheat SH7.

  • high-quality garments are carefully processed
  • pressure and temperature peaks are minimized
  • minimal discoloration from heat marks
  • unevenness perfectly compensated for during transfers
  • minimal energy consumption
  • Great time savings as there is no need to position seams over the edge
  • For retrofitting many old and almost all new Secabo heat presses

Technical data

Working area size:35cm x 45cm
Max. temperature:190°C
Max. contact pressure:360 g/cm² (0.36 bar)
Diaphragm life:The membrane is a wearing part. If you utilize the membrane correctly, you can expect a lifespan of 25,000 transfers. Careful handling increases the lifespan. (trouble-free replacement is guaranteed)
Warm-up time:2.5min - 3min
Pressure setting:Pneumatic pressure range 0-360 g/cm²
Power consumption:Approx. 40% less than conventional heat plates
Power supply:AC voltage 230V / 50Hz - 60Hz, 1.3kW
Environment:+5°C - +35°C / 30% - 70% humidity
Dimensions:44cm x 54cm x 8cm
Items included:Membrane heat plate, pneumatic control kit, connection cable
weight without packaging15,00 kg
weight with package22,00 kg
BrandSecabo

customer Reviews

Unfortunately there are no reviews for this article yet.

Please register to write a review.