The TC5 Clam heat press by Secabo is a modular automatically opening knee lever press. There's no need for the operator to wait next to the press during transfers, consequently allowing him to pursue other activities. The press automatically opens after the configured time. An acoustic signal will notify the operator three seconds ahead of time. The pressing process can be stopped by the press of a button at any time. This feature may for example be used for the purpose of pre-pressing textiles. For your convenience, the temperature and press duration can be pre-configured by use of a digital controller. A counter keeps track of completed pressing processes and can be reset to zero, if desired. The contact pressure can be set using a large hand wheel on the upper side of the heat plate. The TC5 heat press, with a work surface of 38cm x 38cm, features a heat plate equipped with an additional cover plate for the purpose of protecting the operator from suffering burn injuries. The TC5 offers a fully modular design. Control unit, heating plate, base plate and base frame can be removed and replaced in just a few simple steps. As a result, the implementation of other heat plates, for example, is made possible. The TC5 folding press is suitable for professional use of all common heat transfer methods, including flock foils, flex foils, sublimation, inkjet-flex, etc. Optionally, the Secabo TC5 can be equipped with removable plates of various formats, including a membrane base plate, a quick change system and a slide-extension for use as a double plate press.
Your review will be displayed publicly on our website. Please make sure that your review contains no personal data.